What DISP is
The Defence Industry Security Program (DISP) is a membership-based program run by Defence. It is set out in the Defence Security Principles Framework (DSPF), Principle 16, Control 16.1. Its purpose is to make sure industry has the right security in place for Defence tenders and contracts, and to give Defence assurance when it works with members. There is no membership fee. The effort, and the cost, sit in meeting and maintaining the security requirements.
Any Australian entity can apply. Membership is mandatory if you:
- work on classified information or assets, meaning PROTECTED and above
- supply, maintain, store or transport weapons or explosive ordnance
- provide security services for Defence bases or facilities
- are required to hold it as a condition of a Defence contract
The exceptions are classified work done only inside Defence facilities or on Defence networks, and work covered by a Security of Information Agreement or Arrangement. Outside these cases membership is optional, though Defence strongly recommends it, and a prime contractor can make it a condition of a subcontract.
Membership levels and the four domains
DISP has four levels, each aligned to an Australian Government security classification:
| Level | Classification | Personnel security |
|---|---|---|
| Entry level | OFFICIAL and OFFICIAL: Sensitive | OFFICIAL and OFFICIAL: Sensitive |
| Level 1 | PROTECTED | Baseline clearance |
| Level 2 | SECRET | Negative Vetting 1 |
| Level 3 | TOP SECRET | Negative Vetting 2 |
You choose a level in each of four security domains: security governance, personnel security, physical security and ICT and cyber security. Levels can differ between domains, but governance always matches the highest level you hold in any other domain. Levels 1 to 3 need a justification, such as a contract or a letter of endorsement from a Defence contract manager or a sponsoring prime. You only need one membership, however many Defence contracts you hold. Entry level members cannot sponsor security clearances; any clearances they need are sponsored by Defence or another agency.
Eligibility
To be eligible, an entity must be registered in Australia with an ABN or ACN and be financially solvent. A director or senior executive must be able to act as Chief Security Officer (CSO), be able to obtain a personnel security clearance appropriate to the membership level, and set up a Digital ID and a Relationship Authorisation Manager account. A staff member must be able to act as Security Officer (SO); the CSO and SO can be the same person. You must also declare your foreign ownership, control or influence (FOCI), covering foreign directors, shareholders, revenue, investments and agreements with foreign persons.
The cyber requirement
This is where most applicants spend their effort. DISP requires members to meet or exceed the ASD’s Essential Eight at Maturity Level 2 across the corporate ICT systems used to correspond with Defence.
The baseline has risen. DISP previously assessed members against the top four Essential Eight strategies. Defence states that those assessments concluded on 15 November 2025, and all members must now achieve and maintain the full Essential Eight at Maturity Level 2. You show this through the DISP Cyber Security Questionnaire (CSQ), which is aligned to Maturity Level 2. Part B alone contains 107 Essential Eight controls, so it needs someone who knows your environment well, and time.
Two concessions help with timing. A conditional membership pathway lets applicants progress before their Essential Eight Maturity Action Plan is fully complete. Existing members who have submitted a Maturity Action Plan and are waiting for a cyber assessment can get a 12-month extension.
Where ISO 27001 fits
Defence lists ISO/IEC 27001:2022, NIST SP 800-171 and Def Stan 05-138 as standards whose documentation can demonstrate in part how you meet the Essential Eight. That wording matters. A certificate does not exempt you from the CSQ or from Maturity Level 2. What it does give you is evidence of policies, risk management and supporting processes that the cyber assessment would otherwise need you to build from scratch.
The reason it can’t do more is design. ISO 27001 lets you choose controls and settings based on your own risk assessment. The Essential Eight prescribes them: specific patching timeframes, macro settings, application control rules and MFA requirements at each maturity level. Our guide to Essential Eight vs ISO 27001 explains the relationship. The efficient approach is to set Essential Eight Maturity Level 2 as a measurable objective inside your ISMS, so one set of evidence serves both.
What about the ASD Essentials?
In October 2026 the ASD published ASD Essentials for enterprise IT, which it describes as the evolution of the Essential Eight, with guidance on transitioning. The ASD says organisations with regulatory or contractual obligations that require the Essential Eight should keep meeting them as directed by the relevant authority. As at November 2026, Defence’s DISP pages still require the full Essential Eight at Maturity Level 2. Plan to that, and watch for DISP announcements. Our guide to Essential Eight to ASD Essentials covers what changes.
Where ISO 27001 helps across the other domains
| DISP domain | What ISO 27001 gives you | What DISP adds |
|---|---|---|
| Security governance | Clauses 4 to 10: leadership, roles, risk, internal audit, management review; Annex A 5.24 to 5.28 for incidents | A named CSO and SO, security plans and documentation set by the DSPF, registers of incidents and foreign contacts, Defence reporting |
| Personnel security | 6.1 screening, 6.3 awareness and training, 6.5 and 6.6 for leavers and confidentiality | Workforce screening to AS 4811:2022, security clearances through AGSVA at Level 1 and above, overseas travel registers and briefings |
| Physical security | 7.1 to 7.14: perimeters, entry, secure areas, equipment | Zone requirements and facility certification set by Defence and ASIO guidance for classified holdings |
| ICT and cyber | Annex A 8.1 to 8.34, chosen by risk | Essential Eight Maturity Level 2, assessed through the CSQ; higher levels bring ICT accreditation |
A certified ISMS with a scope that covers your Defence-facing operations means the governance documentation DISP asks for is mostly written, owned and audited already. That shortens the Entry Level Assessment considerably. Make sure your ISO 27001 context and interested parties (clause 4) name Defence and the DSPF obligations, and that your Statement of Applicability reflects them.
The application process
Before applying, read DSPF Control 16.1 and work through Defence’s membership requirements checklist. Appoint your CSO and SO, set up a DISP@ email address at your domain, and make sure your entity details match the ASIC register exactly. Then apply through the DISP Member Portal. The application has nine sections: entity details, officer details, contracts and panels, physical and ICT, membership levels, FOCI, the cyber questionnaire, attachments, and preview and submit. The CSO reviews and declares it.
Two timing rules catch people out. An application started in the portal must be submitted within 30 business days or it is removed. And with the latest system changes, mandatory documentation is required before submission rather than afterwards. Have your security policies and plans ready before you start.
Defence then runs an Entry Level Assessment: a review of your security documentation, a phone interview with your security staff and the CSQ. Gaps must be fixed before membership is granted. Defence has acknowledged a backlog and prioritises entities with current Defence contracts or subcontracts, those in tenders or panels, and those supporting the Defence supply chain.
Ongoing obligations
Membership is not a one-off. Members must:
- submit an Annual Security Report, a self-attestation of compliance, within 10 business days of the anniversary of their membership grant date
- report changes in circumstances as they arise, including ownership, FOCI, contracts, facilities, cyber posture (such as a change of managed service provider or maturity level) and a new CSO or SO, which must be notified within 14 days
- keep registers of security incidents and of contacts with foreign nationals, and report security incidents and suspicious contacts
- keep an overseas travel register and briefings for cleared staff, and run regular security training
- keep a classified document register at SECRET and above, and a designated security assessed positions register if you sponsor clearances
Defence also runs risk-based Ongoing Suitability Assessments (desktop audits across all four domains) and deep dive audits that can include site visits, and members must implement recommendations within agreed timeframes. These line up naturally with an ISO 27001 cycle: your internal audit, management review and surveillance audits keep the same evidence current all year. Keeping the ISMS and DISP obligations in one calendar, so the Annual Security Report draws on records you already keep, is work we take on for clients.
Which to do first
If a Defence contract needs DISP now, start with the Essential Eight uplift and the DISP governance documents, because those are what the assessment tests. If you also sell to enterprise or government buyers who want a certificate, build ISO 27001 around the same controls; see how to implement ISO 27001. Our Essential Eight assessment tells you where you stand against Maturity Level 2 before you open the CSQ. Scope drives most of the effort in either case; our guide to ISO 27001 cost in Australia explains why.
Next step
If you are building your ISMS yourself, remember ISO 27001 requires internal audits to be objective and impartial. Staff can do it if they aren’t auditing their own work, which is why many small teams bring in an outside auditor for an independent internal audit. To work out what a Defence contract actually requires of you, book a free 30-minute consultation, or see how our ISO 27001 service works.
